The Omron SenTech STC-MCS241U3V features 163 FPS, and a dazzling 2.35 MP resolution. Utilizing CMOS Global Shutter, the STC-MCS241U3V is capable of capturing moving objects without any motion blur. By utilizing the user friendly USB 3.0 interface, speed and power have never been easier to use.
Specifications:
Scanning System: Progressive
Shutter Type: Global Shutter
Scanning Mode: Full Scanning, Variable AOI (Horizontal and Vertical)
Maximum Frame Rate (in Full Scanning, Free run Model): 1920 x 1200: 163 fps (RAW8bit), 81.5 fps (RAW10bit), 81.5 (RAW12bit). * Frame rate will drop if connected to a USB 2.0 Port
Maximum Frame Rate (AOI Mode): 1280 x 1024: 189 fps (RAW8bit), 94 fps (RAW10bit/RAW12bit), 640 x 480: 378 fps (RAW8bit), 189 fps (RAW10bit/RAW12bit)
Sync System:Internal
Video Output Format: RAW 8bit / 10bit / 12bit (Default Raw 8bit)
S/N Ratio: < 3 digit ( Gain 0 dB)
Electronic Shutter: Exposure Time: 18.6 usec to 20 sec (Full Scanning Mode, RAW8bit), 23.4 usec to 40 sec (Full Scanning Mode, RAW10bit/RAW12bit) Gain
- Analog : 0 to 24 dB
- Digital : 0 to 6 dB
Offset (Analog) : RAW8bit: 0 to 31 digit, RAW12bit: 0 to 511 digit
ROI: ROI (Horizontal 32 to 1920 pixels / Vertical 32 to 1200 lines); (Default: 1920 x 1200 Adjustable Steps for offset: 2 pixels in horizontal direction and 2 lines in vertical direction Adjustable Steps for image size: 16 pixels in horizontal direction and 4 lines in vertical direction Adjustable Steps for ROI 8 Region, 16 pixels in horizontal direction and 4 lines in vertical direction
Binning: N/A
Decimation Function: Individual x2 Horizontal, Vertical Decimation (Frame rate increases with vertical decimation, but the frame rate does not increase with horizontal decimation)
ALC: AE, AGC (Default AE: OFF, AGC: OFF)
White Balance: NAuto / Manual / One-shot (Default: Manual)
Mirror Image : Horizontal / Vertical / Horizontal and Vertical (Default: OFF)
Pixel Defect Correction: Up to 64 pixels (Default: ON)
Operational Mode: Free-run / Edge preset trigger / Pulse width trigger / Start and Stop trigger(Software Selectable)
User Setting Storage: Supported
Interface: USB 3.0 Super Speed (USB 3.0 Micro B)
Input / Output: Three GPIO, One Camera Hardware Reset Mechanical Power:
- Input Voltage: +5V (typ.) (Conform to USB Standard)
- Consumption : < 4.0 W
Dimensions: C Mount: 28 (W) x 28 (H) x 40 (D)mm *excluding the connectors
Lens Mount : C Mount
Optical Filter: IR cut filter
Optical Center Accuracy: Positional Accuracy in H and V directions: +/- 0.3 mm, Rotational accuracy of H and V: +/- 1.5 deg.
Weight : Approx. 48g
Interface Connector: USB Connector: USB 3.0 MicroB type / I/O Connector: HR10A-7R-6PB (Hirose) or equivalent
Environmental
Operating Temperature :
- Minimum : Environmental Temperature: 0 C
- Maximum : Camera housing temperature (top plate) shall not exceed 55 C
Storage Temperature : Environmental Temperature: -30 to +65 ºC, Environmental Humidity: 0 to 85%
Vibration : 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, XYZ 3 directions 30 min. each
Shock : Acceleration 38G, half amplitude 6ms, XYZ 3 directions 3 times each
Standard Compliancy : EMS: EN61000-6-2, EMI: EN55011
RoHS : RoHS Compliant
Need help? We're available 24/7 service.
Online prices and selection generally match our retail stores, but may vary. Prices and offers are subject to change.
2003-2026 http://www.accessories-shops.com Copyright All Rights Recerviced
HongKong Ryfutone Co.,Ltd
