| Sync System |
Free run, External trigger(Hardware, Software) |
| Maximum Frame Rate (Full Scan) |
?C |
| ?C 8Bit Output |
56.0 fps |
| ?C 10Bit Output |
56.0 fps |
| ?C 10bit Packed output |
56.0 fps |
| ?C 12Bit Output |
56.0 fps |
| ?C 12bit Packed output |
56.0 fps |
| ADC bit width |
12bit |
| Video Format |
8/10/12 bit output (Support packed on 10bit, 12bit) |
| Noise Level |
?C |
| ?C 8Bit Output |
<= 3 LSBs (Gain 0 dB) |
| ?C 10bit / 10bit Packed Output |
<= 12 LSBs (Gain 0 dB) |
| ?C 12bit / 12bit Packed Output |
<= 48 LSBs (Gain 0 dB) |
| Sensitivity |
370 Lux |
| Exposure Time |
?C |
| ?C 8Bit Output |
25.2 seconds to 47 seconds |
| ?C 10Bit Output |
25.2 seconds to 47 seconds |
| ?C 10bit / 10bit Packed Output |
25.2 seconds to 47 seconds |
| ?C 12bit Packed output |
25.2 seconds to 47 seconds |
| ?C 12bit Packed output |
25.2 seconds to 47 seconds |
| Gain |
?C |
| ?C Analog (Gain) |
0 to 20.8 dB |
| ?C Digital (Gain) |
0 to 6 dB |
| Black Level |
?C |
| ?C 8Bit Output |
0 to 31 |
| ?C 10bit / 10bit Packed Output |
0 to 127 |
| ?C 12bit / 12bit Packed Output |
0 to 511 |
| White Balance Gain |
Individual x2 Horizontal, Vertical Binning / OFF (Horizontal: Average, Vertical: Addition) *8 |
| ROI (AOI) |
Horizontal: 64 to 2448 (2432 on Packed) / Vertical: 32 to 2048 Adjustable Steps for offset: 16 pixels in horizontal direction (64 pixels on Packed) / 4 lines in vertical direction Adjustable Steps for offset: 4 pixels in horizontal direction / 4 lines in vertical direction |
| Gamma |
Gamma Table =0.1 to 4.0, Default = 1.0 |
| Binning |
N/A |
| Decimation |
Individual x2 Horizontal, Vertical Decimation |
| Image Flip |
Horizontal / Vertical / Horizontal and Vertical / OFF |
| Pixel Defect Correction |
Up to 64 points |
| Auto Image Control |
?C |
| ?C Auto Exposure |
Support (Default: Fix 27.5 mseconds) |
| ?C Auto Gain |
Support (Default: Fix x1 |
| ?C Auto White Blance |
N/A |
| Operational Mode |
Free-run / Edge-preset Trigger / Pulse width Trigger / Start Stop Trigger |
| User Setting Storage |
Support |
| Communication |
Via USB3.0 bus |
| Interface |
USB 3.0 Super Speed (USB 3.0 Micro B) |
| Protocol |
USB3 Vision® 1.0.1, GenICam Standard Version (SFNC 2.2, PFNC 2.0) compliant and Sentech’s unique protocol (on Normal SDK, Trigger SDK) |
| Input / Output |
Three GPIO, One Camera Hardware Reset |
| Power |
?C |
| ?C Input Voltage |
+5V(typ.) (This conforms to the USB standard |
| ?C Consumption |
Max: 3.4W, Typ: 2.8W |
